A new feature to augment our laser scanning subsystem, our Instant Scan allows simple and easy scenario tests and verifications. By using a "virtual knife", the user can draw a line of interest on a model part from an imported CAD file. The system scans and displays the vitual cross-section of the line without any programming or part destruction. Traditionally, an object might be cross-sectioned and then examined with an optical comparator to verify component quality (for parting lines, for example) or dimensional height (gaskets). New Precision can now quickly obtain this information non-destructively with our non-contact laser measurement system at speeds reasonable for 100% in-line production inspection.

    This is a laser-based gasket presence sense system that can work in conjunction with dispensing on ICP and CP systems by New Precision Technology. Based on a "learning" process, the software automatically builds a model of the part and compares the current scan to the model. If the scan fails and Quality Control determines it should not have failed, the scan is incorporated into the "passing" category and similar parts will not fail on future scans. Scans are possible at 5"/second to 12"/second and beyond, depending on the minimum defect to be captured.

    It is now possible to monitor factory dispense productivity across the web. Accessed through secure socket layer with 128 bit encryption, the members portal of the newprecisiontech (nptinc) website can provide detailed, up to the minute information on good parts completed versus bad, idle time versus down time, and operator productivity. This information can be used for purposes of line balancing so that underperforming hardware can be recognized and retasked, shift productivity assessment, and machine mechanical state (so that maintenance can be consistently scheduled). As well, it enables staff at New Precision Technology to monitor maintenance and assist with optimizing program efficiency.
ALL FEATURES ARE END USER SELECTABLE AND THE END USER CAN LIMIT ACCESS TO ANY FEATURES

    This new subsystem allows DXF files to be read, layers and contours to be selected, and order of contours to be determined. It also allows for repositioning of contours to get the best inital approximations. Conversion from english to metric is also accounted for. The DXF reader allows for NPT programs to be built quickly and automatically.

    Although our machines typically come pre-programmed as part of an overall turn-key system, we offer training sessions that cover programming for a broad range of applications and we share our experiences that minimize operator training, minimize part defects, and maximize your return on investment. We have a simple pattern programming scheme that does not require G-code knowledge or specialized training. We also have available tools such as a DXF file reader and a Gerber file reader that allow simplified importing, and a coating application assistant that dramatically reduces programming time for conformal coating and paint application programs.